100W/52V Desktop Power Adapter(With Certification),100W/52V Desktop Power Adapter

中文

Location：Home>Product> AC/DC Power Adapter > Desktop Power Adapter> 100W Series> 100W/52V Desktop Power Adapter(With Certification)

Name：100W/52V Desktop Power Adapter(With Certification)

Model：GWS-AP100-52C

100W/52V Desktop Power Adapter(With Certification)

Name：
Information：
Email：
Telephone：
Company：
Code：
	Submit

Product

Industrial Power supply

DIN Rail +
POE Series 12W Series 24W Series 36W Series 60W Series 120W Series 240W Series

Parallel power supply+
120W Series 240W Series

COMM. Power Supply

Open Frame +
POE Series 30W Series 65W Series 120W Series 130W Series 250W Series 400W Series 600W Series

AC/DC Power Adapter

Desktop Power Adapter+
POE Serise 24W Series 36W Series 65W Series 100W Series 120W Series 130W Series 240W Series

Security Power Supply

Waterproof+

Overview
Specification
Download

Product Name	100W/52V Desktop Power Adapter(With Certification)
Model	GWS-AP100-52C
Group of Output	1
DC Voltage	52V
Default Output Voltage	0-1.92A
Ripple Noise	0＜Ta≤55℃,≤50mVp-p ;-15≤Ta≤0℃,≤100mVp-p
Stabilized Voltage Precision	±1%
Line Regulation	±1%
Load Regulation	±1%
Temperature Coefficient	±0.03%/℃
Output Start Time	≤3.0S (120Vac input, Full load); ≤2.0S (220Vac input, Full load)
Output Hold Time	≥10mS(120Vac input, Full load); ≥20mS(220Vac input, Full load)
Voltage Overshoot	<5.0%
Input Voltage Range	90~264VAC
Input Rated Voltage Range	100~240VAC
Frequency Range	47Hz~63Hz
Efficiency	≥89%
Input Current	<0.82A
Inrush Starting Current	<40A@300Vac Cold start;
Leakage Current	input to output less than 0.25mA
Over Power Protection	120~150W Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode:Swing machine, Self-recovery after over-power released.)
Over Voltage Protection	59-60V Swing machine (Short circuit the Pin1-2 of U8, swing machine. Output recovery to normal after removing the short circuit) Note: Do not use external voltage.
Over Current Protection	2.304~2.88A Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode:Swing machine, Self-recovery after over-current released.)
Short Circuit Protection	It can be short circuited for a long time and automatically recover after the short circuit is eliminated.
Operation Temperature and Humidity	-20℃~65℃; 20%~90%RH No condensing
Storage Temperature and Humidity	-40℃~85℃; 5%~95%RH non-condensing
Libration	Frequency range: 10 ~ 500Hz, Acceleration: 2G, Each sweep cycle 10min. Six sweeps along the X, Y, and Z axis
Security Standard	GB4943/EN60950
Dielectric Strength	Input—Output:3KVac/10mA; Input--Case:1.5KVac/10mA; Output---Case:0.5KVDC/10mA Time for each testing is 1min.
Insulation Resistance	Input-Output: 100M ohms; Input-Case: 100M ohms; Output-Case: 100M ohms;
Electromagnetic Interference	EN55022 Class A
Harmaonic Current	IEC61000-3-2 class A equipment requirements
Electromagnetic interference Immunity	EN61000-4-2,4,5,6,8,11 ENV50204, class A heavy industry standard
Design MTBF	100,000Hrs AT 25℃, MIL-217 Method 2 Components Stress Method
Product size(LWH)	14160.531.5mm
Certification	3C.CE. FCC.EMI/EMC
Notes	If the specification is not specified, all specifications and parameters shall be measured at rated input, rated load and 25 C ambient temperature. Ripple noise test method: the use of a 12# twisted pair, while the terminal to parallel capacitance of 0.1uF and 10uF, measured at the scope of the oscilloscope 20MHz bandwidth. The power supply will be installed on the final equipment as a component, and the final equipment will still have to meet the EMC condition.