400W/52V Open Frame Power Supply(With Certification) ,400W/52V Open Frame Power Supply

中文

Location：Home>Product> COMM. Power Supply> Open Frame > 400W Series> 400W/52V Open Frame Power Supply(With Certification)

Name：400W/52V Open Frame Power Supply(With Certification)

Model：GWS-BP400-52c

400W/52V Open Frame Power Supply(With Certification)

Name：
Information：
Email：
Telephone：
Company：
Code：
	Submit

Product

Industrial Power supply

DIN Rail +
POE Series 12W Series 24W Series 36W Series 60W Series 120W Series 240W Series

Parallel power supply+
120W Series 240W Series

COMM. Power Supply

Open Frame +
POE Series 30W Series 65W Series 120W Series 130W Series 250W Series 400W Series 600W Series

AC/DC Power Adapter

Desktop Power Adapter+
POE Serise 24W Series 36W Series 65W Series 100W Series 120W Series 130W Series 240W Series

Security Power Supply

Waterproof+

Overview
Specification
Download

Product Name	400W/52V Open Frame Power Supply(With Certification)
Model	GWS-BP400-52C
Group of Output	1
DC Voltage	52V
Default Output Voltage @25℃	50.00-53V （Vin：220VAC / LOAD：0A）
Output Rated Current	7.7A
Output Current Range	0-7.7A
Output Rated Power	400W
Total Peak Output Power	Up to 600W(Sustainable time 10S/220VAC)
Peak Output Current	11.5A( Sustainable time 10S/220VAC)
Ripple noise	0＜Ta≤65℃; P-P≤200mV ; -20≤Ta≤0℃; P-P≤200mV
Output Regulation Range @25℃	47~54V
Stabilized Voltage Precision @-20~65℃	±2% (50.96V-53.04V)
Line Regulation @-20~65℃	±0.5%
Load Regulation @-20~65℃	±2% (50.96V-53.04V)
Temperature Coefficient @-20~65℃	±0.03%/℃
Output Start Time @25℃	≤2S /220Vac input, Full load)
Output Hold Time @25℃	≥10mS(220Vac input, Full load)
Voltage Overshoot @-20~65℃	≤5%
Input Voltage Range	90~264VAC
Input Rated Voltage Range	100~240VAC
Frequency Range	47Hz~63Hz
Starting Voltage @-20~65℃	90Vac
Efficiency @ 25℃	≥93%（230VAC FULL LOAD）
Input Current @25℃	＜5.5A
Inrush Starting Current@25℃	＜50A@220Vac Cold start
Power Factor @25℃	PF>0.98/110VAC & PF>0.95/220VAC
Over power	480~600W Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode:Swing machine, Self-recovery after over-power released.)
Over voltage	57~70V Swing machine (Short circuit the Pin1-2 of U8, swing machine. Output recovery to normal after removing the short circuit) Note: Do not use external voltage.
Over current	9.2~11.5A Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode:Swing machine, Self-recovery after over-current released.)
Short circuit	It achieves the long-term short circuit by connecting a sufficient cross-sectional area copper cable (Length at 15cm±5cm) with power output port. Self-recovery to normal after removing the short circuit.
Operation Temperature and Humidity	-20~65℃; 20%~95%RH
Storage Temperature and Humidity	-40℃~85℃; 10%~95%RH non-condensing
Libration	Frequency range: 10 ~ 500Hz, Acceleration: 2G, Each sweep cycle 10min. Six sweeps along the X, Y, and Z axis
Surge	Acceleration: 20G, Duration time: 11mS, Three shocks along X, Y and Z axis
Altitude	2000m
Security Standard	GB4943/EN60950 ■Reference □Certification
Dielectric Strength	Input—Output:3KVac/10mA; Input--Case:1.5KVac/10mA; Output---Case:0.5KVDC/10mA Time for each testing is 1min.
Grounding Test	Test Condition: 32A/2min; Ground bond: ＜0.1 ohms.
Leakage Current @25℃	Input to GND ≤3.5mA; Input to output ≤0.25mA (Input 264Vac, 63Hz)
Insulation Resistance	Input-Output: 10M ohms; Input-Case: 10M ohms; Output-Case: 10M ohms;
Conducted Interference	EN55022, EN55024, FCC PART 15 CLASS B
Radiated Interference	EN55022, EN55024, FCC PART 15 CLASS B
Harmaonic current	EN61000-3-2 CLASS D
Conducted Emission	EN61000-4-6 Level3
Radiated Emission	EN61000-4-3 Leve3 criterion B
Power Frequency Emission	EN61000-4-8 Level3
Electrostatic Emission	EN61000-4-2 Level4 criterion B
EFT	EN61000-4-4 Level4 criterion B
Surge	EN61000-4-5 Level4 criterion B
Dip and Interruption	EN61000-4-11
Dimension	19410439mm
Certification	3C.CE. FCC.EMI/EMC
Notes	If the specification is not specified, all specifications and parameters shall be measured at rated input, rated load and 25 C ambient temperature. Ripple noise test method: the use of a 12# twisted pair, while the terminal to parallel capacitance of 0.1uF and 10uF, measured at the scope of the oscilloscope 20MHz bandwidth. The power supply will be installed on the final equipment as a component, and the final equipment will still have to meet the EMC condition.