Industrial DIN Rail Power Supply

中文

Location：Home>Product> Industrial Power supply> DIN Rail > 60W Series> 60W/24V Industrial DIN Rail Power Supply

Name：60W/24V Industrial DIN Rail Power Supply

Model：GWS-DP60-24

60W/24V Industrial DIN Rail Power Supply

Name：
Information：
Email：
Telephone：
Company：
Code：
	Submit

Product

Industrial Power supply

DIN Rail +
POE Series 12W Series 24W Series 36W Series 60W Series 120W Series 240W Series

Parallel power supply+
120W Series 240W Series

COMM. Power Supply

Open Frame +
POE Series 30W Series 65W Series 120W Series 130W Series 250W Series 400W Series 600W Series

AC/DC Power Adapter

Desktop Power Adapter+
POE Serise 24W Series 36W Series 65W Series 100W Series 120W Series 130W Series 240W Series

Security Power Supply

Waterproof+

Overview
Specification
Download

60W/24V Industrial DIN Rail Power Supply

GWS-DP60-24 is one economical slim 60W industrial DIN Rail power supply series, adapting to be installed on TS-35/7.5 or TS-35/15 mounting rails. The entire series adopts the full range AC input from 90VAC to 264VAC and conforms to EN61000-3-2, the norm the European Union regulates for harmonic current.

GWS-DP60-24 is designed with metal housing that enhances the unit’s power dissipation. With working efficiency up to 89%, the entire series can operate at the ambient temperature between -40℃ to 70℃ under air convection. It is equipped with constant current mode for over load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control apparatus make GWS-DP60-24 a very competitive power supply solution for industrial applications.

Product Name	60W/24V Industrial DIN Rail Power Supply
Model	GWS-DP60-24
Group of Output	1
DC Voltage	24V
Default Output Voltage @25℃	DC24.00-24.20V （Vin: 220VAC / LOAD:0A）
Output Rated Current	2.5A
Output Current Range	0-2.5A
Output Rated Power	60W
Total Peak Output Power	Up to 90W(Sustainable time 10S/220VAC)
Peak Output Current	3.75A( Sustainable time 10S/220VAC)
Ripple noise	Peak - Peak ≤100mV (Test Method: The terminal shall be in parallel with capacitance of 0.1uF and 47uF, testing at 20MHz)
Output Regulation Range @25℃	DC22.5~28V
Stabilized Voltage Precision @-20~65℃	±1%
Line Regulation @-20~65℃	±0.5% (@ 85-264Vac input, 100% load)
Load Regulation @-20~65℃	±1% (@ 85-264Vac input, 0-100% load)
Temperature Coefficient	±0.03%/℃, （0～50℃）
Output Start Time @25℃	< 1.5S @ nominal input (100% load )
Output Hold Time @25℃	> 20ms @ 115Vac, > 125 ms @ 230Vac (100% load )
Voltage Overshoot @-20~65℃	≤5%
Input Voltage Range	90~264VAC
Input Rated Voltage Range	100~240VAC
Frequency Range	47Hz~63Hz
Starting Voltage @-20~65℃	90Vac
Efficiency @ 25℃	> 85.0% @ 115Vac, > 89.0% @ 230Vac
Input Current @25℃	< 1.40A @ 115Vac, < 0.80A @ 230Vac
Power Factor @25℃	PF>0.6 (at full load)
Over Power Protection	78~97W Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode:Swing machine, Self-recovery after over-power released.)
Over Voltage Protection	30~36V Swing machine (Short circuit the Pin1-2 of U8, swing machine. Output recovery to normal after removing the short circuit) Note: Do not use external voltage.
Over Current	3~3.75A Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode:Swing machine, Self-recovery after over-current released.)
Short Circuit Protection	It achieves the long-term short circuit by connecting a sufficient cross-sectional area copper cable (Length at 15cm±5cm) with power output port. Self-recovery to normal after removing the short circuit.
Operation Temperature and Humidity	-40~70℃; 20%~95%RH
Storage Temperature and Humidity	-40℃~85℃; 10%~95%RH non-condensing
Libration	Frequency range: 10 ~ 500Hz, Acceleration: 2G, Each sweep cycle 10min. Six sweeps along the X, Y, and Z axis
Surge	Acceleration: 20G, Duration time: 11mS, Three shocks along X, Y and Z axis
Altitude	2000m
Security Standard	GB4943/EN60950 ■Reference □Certification
Dielectric Strength	Input—Output:3KVac/10mA; Input--Case:1.5KVac/10mA; Output---Case:0.5KVDC/10mA Time for each testing is 1min.
Grounding Test	Test Condition: 32A/2min; Ground bond: ＜0.1 ohms.
Leakage Current @25℃	Input to GND ≤3.5mA; Input to output ≤0.25mA (Input 264Vac, 63Hz)
Insulation Resistance	Input—Output: 10M ohms;
Conducted Interference	EN55022, EN55024, FCC PART 15 CLASS B
Radiated Interference	EN55022, EN55024, FCC PART 15 CLASS B
Harmaonic current	EN61000-3-2 CLASS D
Conducted Emission	EN61000-4-6 Level3
Radiated Emission	EN61000-4-3 Leve3 criterion B
Power Frequency Emission	EN61000-4-8 Level3
Electrostatic Emission	EN61000-4-2 Level4 criterion B
EFT	EN61000-4-4 Level4 criterion B
Surge	EN61000-4-5 Level4 criterion B
Dip and Interruption	EN61000-4-11